Research

Six Lines, Two Domains

Converters for electric mobility and for renewable energy and storage, with wide-bandgap devices as the common thread.

Electric mobility
  1. 01
    Electric Vehicles
    Powertrains and wireless charging
  2. 02
    Railway
    Traction, auxiliary systems and onboard storage
  3. 03
    Light and Unmanned Electric Mobility
    E-bikes, micromobility and UAVs
Energy and power
  1. 04
    Renewable Energy Integration
    Grid-connected and grid-forming converters
  2. 05
    Energy Storage
    Batteries, supercapacitors and hydrogen
  3. 06
    Wide-Bandgap Power Electronics
    GaN and SiC devices, design and reliability

Project spotlights

Recent Results

HI-MOV · UAV

GaN Synchronous Buck Converter for PEMFC-Powered UAVs

Hydrogen fuel cells promise long flight endurance for UAVs, but need efficient power conversion to be flight-viable.

QuestionWhich topology best integrates a PEM fuel cell into a drone's electric propulsion at minimal weight and volume?
  • GaN synchronous buck converter (EPC90120 / EPC2152), compact and high-efficiency.
  • Supercapacitor bank with precharge and passive balancing for stable PEM operation.
  • Electro-thermal system validated through PLECS simulation.
GaN buck converter and supercapacitor PCB
GaN buck converter and supercapacitor PCB.

Railway · auxiliary systems

Hybrid Fuel Cell–Battery Architecture for Railway Auxiliary Systems

Electrified trains depend on the grid and catenary; onboard energy autonomy cuts peak load and emissions.

QuestionHow to add a hydrogen fuel cell and battery to the 700 V auxiliary bus without losing efficiency or thermal margin?
  • GaN 2L–5L Dual Active Bridge (4 × GS66516 HEMTs per switch) for bidirectional energy transfer.
  • Cascaded PI control keeps the bus stable under ESS-charging and load-support transients.
Peak efficiency
99.04 %
Switching
50 to 200 kHz
Max Tj
< 45 °C

PLECS simulation · 700 V auxiliary DC bus

Proposed onboard hybrid system architecture
Proposed onboard hybrid system architecture.

GreenShip · MVDC

Full-Bridge LLC Resonant Converter for PEMFC Integration into a Vessel MVDC Bus

Shipboard diesel generators are inefficient at partial load; MVDC architectures ease the integration of low-emission sources such as PEM fuel cells.

QuestionHow to interface a 100 V PEMFC stack to the 750 V MVDC bus with isolation, high step-up and ZVS across the full load range?
  • SiC full-bridge LLC at 85 kHz (fr = 100 kHz), 1:7.5 transformer on a TDK EC90/90/30 core with Litz wire.
  • Closed-loop PI rejects a 50 to 100 % load step with less than 1.3 % bus deviation, recovering in about 40 ms.
Converter
≈ 96.1 %
Transformer
99.2 %
Primary Tj
58.3 °C

PLECS simulation · SiC device models · 750 V bus

Proposed hybrid PEMFC and battery MVDC shipboard architecture
Proposed hybrid PEMFC and battery MVDC shipboard architecture.